The use of fly ash as a part of the formingironphosphate cold-hardening mixes
DOI:
https://doi.org/10.15802/tpm.4.2025.04Keywords:
form, core, iron phosphate, flow ashAbstract
Use of fly ash in the composition of molding and core mixtures as a partial substitute for quartz sand. Methodology. Methods for determining the main technological parameters of molds and cores correspond to those used in specialized production. Findings. Compositions of multicomponent iron phosphate molding CTS based on dispersed technogenic materials have been developed as a replacement for traditionally used materials. Originality. The possibilities of using fly ash in fresh and regenerated cold-hardening iron phosphate mixtures as a filler and/or a stabilizer of the granulometric composition have been identified. Practicalvalue. The use of technogenic materials as a replacement for traditionally used ones will reduce the costs of casting production and improve the environmental situation in the region where the foundry is located.
References
Ne vidkhody, a resursy: shcho robyty z milʹyardamy tonn metalurhiynykh shlakiv Ukrayiny: veb-sayt. https://ecopolitic.com.ua/ua/news/ne-vidhodi-a-resursi-shho-robiti-z-milyardami-tonn-metalurgijnih-shlakiv-ukraini/
Khrychikov, V. Ye., Seliverstov, V. YU., Mazorchuk, V. F., Naumov, O. S., Fomenko, G. V., & Usenko, R. V. (2006). Promyshlennyye otkhody kak al'ternativa komponentam termostoykikh sostavov formovochnykh smesey. Metallurgicheskaya i gornorudnaya promyshlennost, (2), 36-38.
Osipenko, I. A., & Belyy, A. P. (2005, 7-9 iyunya). Primeneniye kremnezemistoy tonkodispersnoy pyli v sostavakh kholodnotverdeyushchikh formovochnykh smesey. Ekonomicheskiy put k vysokokachestvennomu lityu: tez. dokl., Kiyev, 126-127.
Osipenko, I. A., & Repyakh, S. I. (2020). Primeneniye tonkodispersnogo kremniysoderzhashchego materiala sukhoy gazoochistki ferosplavnogo proizvodstva v formovochnykh smesyakh. Vesnik KGIU, 4(31), 36-41.
Gupalo, O., Vorobiova, L., & Osypenko, I. (2015, September 23 – 25). Ring furnace regenerative heating system efficiency. Energy transformation sin industry: 14th International Scientific Conference, Lubovna, p. 31-39.
Osypenko, I. (2007, june 13 – 15). Properties of phosphatic coldhardening mixtures (CHM) with use of ferrosilicon finely dispersed dust, obtained in dry gas cleaning of ferroalloy furnaces. Energy transformation sin industry : 10th International Scientific Conference, Tatranska Strba, p. 268-271.
Osypenko, S. (2014, june 22 – 26). Shurapey. Properties of phosphatic cold hardening mixtures (CHM) with use of ferrosilicon finely dispersed dust. materials and metallurgy: 11th international symposium of croatian metallurgical society šibenik, Šibenik, p. 52.
Lyutyy, R. V., Huriya, I. M., Keush, D. V., & Nadtochiy, O. S. (2013). Rozroblennya tekhnolohiyi vyhotovlennya form i stryzhniv iz sumishey z ortofosfornoyu kyslotoyu i solyamy natriyu. Vestnyk DHMA, 4(29), 140-147.
Lyutyy, R. V., Huriya, I. M., Keush, D. V., & Anisimova, O. A. (2013). Vyznachennya optymalʹnoho skladu stryzhnevykh sumishey z novymy zvʺyazuvalʹnymy komponentamy, yaki utvoryuyutʹsya pry vzayemodiyi ortofosfornoyi kysloty z neorhanichnymy solyamy alyuminiyu. Vestnyk DHMA, 2(12E), 17-24.
Urotropin: Web-site: https://uk.wikipedia.org/wiki/%D0%A3%D1%80%D0%BE%D1%82%D1%80%D0%BE%D0%BF%D1%96%D0%BD.
Sulfanol: osnovni vlastyvosti, metody vykorystannya ta pravy lazberihannya: Web-site: https://soda.kiev.ua/ua/sulfanol-osnovni-vlastyvosti-metody-vykorystannya-ta-pravyla-zberigannya.html.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media. Articles will be distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence.
Authors can enter the separate, additional contractual arrangements for non-exclusive distribution of the published paper (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
