Analysis of processes and methods for expanding the protein base coking plant. Note 1. The problem of expanding the serum base coking plant
DOI:
https://doi.org/10.15802/tpm.3.2024.12Keywords:
raw material base of coking, coal briquetting, briquetting with binders, tamping, thermal pyrolysis, thermocatalytic processesAbstract
Purpose. To analyze postmodern methods that allow expanding the raw material base for coking for the effective use of the country's fossil natural resources. Methodology. Analysis of modern and postmodern methods and technologies related to the methodology of expanding the raw material base for coking. Results. Priority methods for expanding the raw material base for coking were analyzed. The classification of methods was determined and divided into mechanical methods, thermal methods, and specific methods that involve changing the properties of coal. Methods involving coal compaction were analyzed. Scientific Novelty. The critical analysis of both domestic and foreign sources regarding existing methods and techniques for expanding the raw material base of coking revealed insufficient study of the issue, which prevents the implementation of the proposed technologies. Practical Significance. The study of the issue of expanding the raw material base of coking allowed establishing the insufficiency of knowledge and scientific provisions about the structure of caking coal and its properties, which makes its effective use impossible.
References
Rudyka, V. I. (2006). Realii s proizvodstvom i potrebnostiami v kokse i koksuiushchikhsia ugliakh na sovremennom etape razvitiia mirovoi metallurgii. Koks i khimiia, (1), 2-5
Yaroshevskyi, S. L., Yemchenko, A. V., Shulha, I. V. et al. (2012). Resursozberihaiuchi tekhnolohii metalurhiinoho vyrobnytstva na osnovi vykorystannia ukrainskoho vuhillia. Kontrast
Stohnii, O. V., Makarov, V. M., & Kaplin, M. I. (2011). Potentsial vydobutku vuhillia v Ukraini. Problemy zahalnoi enerhetyky, (2(25)), 11-16
Starovoit, A. G., Rudyka, V. I., & Kovalev, E. T. (2009). Problemy i perspektivy globalnogo i evropeiskogo rynkov stali, koksa i uglia. Analiticheskii obzor materialov sammita “Evropeiskii koks 2009”. Chernaia metallurgiia, (7), 35-39
Kovalev, E. T. (2004). Osnovnye tendentsii sovremennoi tekhnologii koksovaniia. Uglekhimicheskii zhurnal, (3-4), 32-35
Grebenshchikov, V. P., & Gusev, S. M. (2002). Sovremennoe sostoianie mirovoi ugolnoi promyshlennosti. Ugol, (1), 22-28
Taits, E. M. (1996). Novye metody podgotovki i koksovaniia uglei. Gos.Nauch.-tekhn. izd-vo lit. po chernoi i tsvetnoi metallurgii.
Akhtyrchenko, A. M. (1998). Tekhniko-ekonomicheskaia otsenka novykh tekhnologicheskikh protsessov koksovaniia. Tematicheskii sbornik nauchnykh trudov UKHIN, 66-70
Goncharov, V. F. (1982). Teoriia i tekhnologiia novykh vidov metallurgicheskogo topliva i vosstanovitelei na osnove nepreryvnogo protsessa koksovaniia. (Dissertation of the doctor of technical sciences, Dnipropetrovsk)
Saranchuk, V. I., Oshovskii, V. V., & Vlasov, G.A. (2001). Fiziko-khimicheskie osnovy pererabotki goriuchikh iskopaemykh. Skhіdnii vidavnichii dіm
Davidzon, A. R., & Drozdnik, I. D. (2006). Tekhnologicheskie vozmozhnosti uluchsheniia kachestva koksa. Koks i khimiia, (8), 15-18
Eremin, I. V., & Bronivets, T. M. (1994). Marochnyi sostav uglei i ikh ratsionalnoe ispolzovanie. Nedra
Kovalev, E. T., & Drozdnik, I. D. (2010). Vozmozhnost polucheniia vysokokachestvennogo koksa v usloviiakh sushchestvuiushchei syrevoi bazy Ukrainy. Uglekhimicheskii zhurnal, (3-4), 11-17
Rudyka, V. I., & Malina, V. P. (1997). O perspektivakh razvitiia koksovogo proizvodstva i ego tekhnologii. Metallurgicheskaia i gornorudnaia promyshlennost, (3), 17-21
Giulmaliev, A. M., Golovin, G. S., & Gladun, T. G. (2003). Teoreticheskie osnovy khimii uglia. MGGU
Filatov, Iu. V., Krikunov, B. P.,& Gordienko, A. I. (2007). Opyt proizvodstva domennogo koksa uluchshennogo kachestva iz ukrainskikh uglei i ispolzovanie ego v domennoi pechi s primeneniem PUT. Uglekhimicheskii zhurnal, (5-6), 11-18
Ukhmylova, G. S. (1987). Osvoenie progressivnykh protsessov rasshireniia syrevoi bazy koksovaniia za rubezhom. Obzornaia informatsiia institut “Chermetinformatsiia”. Koksokhimicheskoe proizvodstvo, (1)
Yaroshevskyi, S. L., Yemchenko, A. V., Shulha, I. V. et al. (2012). Resursozberihaiuchi tekhnolohii metalurhiinoho vyrobnytstva na osnovi vykorystannia ukrainskoho vuhillia. Kontrast
Ukhmylov, G. S. (2006). Optimizatsiia sostva ugolnoi shikhty dlia koksovaniia. Koks i khimiia, (1), 13-15
Glushchenko, I. M. (1976). Prognoz kachestva koksa. Metallurgiia
Ulanovskii, M. L. (2009). Prognoz kachestva koksa po pokazateliam CSR i CRI. Koks i khimiia, (10), 17-23
Guliaev, V. M., Barskii, V. D., & Rudnitskii, A .G. (2012). O evropeiskikh trebovaniiakh metallurgov k kachestvu domennogo koksa. Koks i khimiia, (10), 13-17
Kravtsov, V. P., & Papin, A. V. (2012). Aktualnost tekhnologii briketirovaniia koksovoi pyli. Vestnik Kuzbasskogo gosudarstvennogo universiteta, Khimicheskaia tekhnologiia, 112-113
Borisenko, A. L., Drozdnik, I. D., Kaftan, IU. S. et al (2018). Poluchenie briketov iz ugolnykh shikht i kontsentratov s ispolzovaniem razlichnykh vidov uglevodorodnykh dobavok. Opredelenie kachestva ugolnykh briketov i chastichno briketirovannykh shikht. Uglekhimicheskii zhurnal, (1), 10-12
Nefedov, P. Ia., Kopelovich, L. V., Eremin, A. Ia, Mishikhin, V. G., Ryvkin, I. Iu., & Litvin, E. M. (1987). Rol sviazuiushchego kak spekaiushchegosia komponenta chastichno briketirovannoi ugolnoi shikhty. Koks i khimiia, (8), 18-22
Savchuk, V., Rudakov, D., & Prykhodchenko, D. (2016). Аssessment of coal quality on the site “uspenivska no 2” in western donbas based on the statistical analysis of its chemical and technological properties. Mining of Mineral Deposits, 10(4), 98-104
Filatov, IU. V., Chalenko, V. I., Kovalev, E. T., & Drozdnik, I. D. (2013). Kontseptsiia razvitiia ugolnoi syrevoi bazy dlia proizvodstva koksa marki “Premium””. Uglekhimicheskii zhurnal, (6), 12-19
Karpov, A. V., & Nikitin, N. I. (2004). Vliianie podgotovki ugolnoi shikhty na kachestvo koksa. Uglekhimicheskii zhurnal, (5-6), 35-37
Elenskii, F. Z., Belichenko, A. G., & Chernyshev, IU. A. (1975). Master podgotovki uglia k koksovaniiu. Metallurgiia
Khadzhioglo, A. V., Semisalov, L. P., Dolgarev, G. V., & Shchelkunov, F. S. (1989). Termicheskaia podgotovka uglei i koksovanie shikht iz uglei CHSSR. Koks i khimiia, (8), 10-14
Polupromyshlennaia ustanovka dlia sukhogo tusheniia koksa i termicheskoi podgotovki shikhty k koksovaniiu. Ekspress-informatsiia. (1982). Seriia “Koksokhimicheskoe proizvodstvo”, (8), 4-5
Tamko, V. A., Zolotarev, I. V., Saranchuk, V. I., Zbykovskii, E. I., Shendrik, T. G., & Shvets, I. I. (2010). Obrabotka domennogo koksa vodnym rastvorom tetraborata natriia. Khimiia tverdogo topliva, (1), 15-18
Starovoit, A. G., & Zingerman, IU. E. (Eds.). (2014). Spravochnik koksokhimika. Volume 2. Proizvodstvo koksa. ID “INZHEK”
Vasilev, Iu. S., Kuznichenko, V. M., Loboda, A. A. et al. (2004). Desiat let tekhnologii koksovaniia trambovanykh ugolnykh shikht. Uglekhimicheskii zhurnal, (1), 19 – 22
Vasilev, Iu. S., Gordienko, A. I., Dolgarev, G. V. et al. (2010). Pervaia promyshlennaia koksovaia batareia s ustanovkoi termicheskoi podgotovki shikhty v Ukraine kak sposob povysheniia resurso- i energoeffektivnosti metallurgicheskoi otrasli. Uglekhimicheskii zhurnal, (3-4), 49-52
Borisenko, L. A., Drozdnik, I. D., Kaftan, Iu. S. et al. (2018). Opredelenie effektivnosti ispolzovaniia uglevodorodnykh produktov koksokhimicheskogo proizvodstva i organicheskogo sinteza v kachestve sviazuiushchego dlia briketirovaniia chasti ugolnoi shikhty ili ee komponentov. Poluchenie briketov iz ugolnykh shikht i kontsentratov s ispolzovaniem razlichnykh vidov uglevodorodnykh dobavok. Opredelenie kachestva ugolnykh briketov i chastichno briketirovannykh shikht. Uglekhimicheskii zhurnal, (1), 10-12
Zbykovskyi, Ye. I. (2019). Tekhnolohiia utylizatsii vidkhodiv koksokhimichnoho vyrobnytstva pry chastkovomu bryketuvanni vuhilnoi shykhty pered koksuvanniam. In Resursozberihaiucha tekhnolohiia kompleksnoi enerho-khimiko-tekhnolohichnoi pererobky vuhillia v umovakh koksokhimichnoho vyrobnytstva. DVNZ “Don NTU”, pp. 21-28
Zbykovskyi, Ye. I. (2019). Pisliapichna obrobka koksu .In Resursozberihaiucha tekhnolohiia kompleksnoi enerho-khimiko-tekhnolohichnoi pererobky vuhillia v umovakh koksokhimichnoho vyrobnytstva. DVNZ “Don NTU”, pp. 43-45
Zbykovskyi, Ye. I. (2019). Tekhnolohiia vyrobnytstva bezdymnoho tverdoho palyva iz zastosuvanniam tekhnolohii termichnoi pidhotovky shykhty. In Resursozberihaiucha tekhnolohiia kompleksnoi enerho-khimiko-tekhnolohichnoi pererobky vuhillia v umovakh koksokhimichnoho vyrobnytstva. DVNZ “Don NTU”, pp. 60-61
Krivonos, V. V., Vasilev, Iu. S., & Drozdnik, I. D. (2009). Osvoenie tekhnologii trambovaniia na Alchevskom KKHZ s ispolzovaniem uglei Ukrainy i Rossii. Uglekhimicheskii zhurnal, (5-6), 85-89
Starovoit, A. G., & Zingerman, IU. E. (Eds.) (2017). Spravochnik koksokhimika. Volume 1. Proizvodstvo koksa. ID “INZHEK”
Rasshirenie syrevoi bazy koksovaniia. (1981). Technocral, 14(8), 61, Cluckauf, 117(18), 1260
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Kashirnaya N.O., Korenev O.V., Sorokin E.L., Starovoit A.G., Malyi E.I., Starovoit M.A.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media. Articles will be distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence.
Authors can enter the separate, additional contractual arrangements for non-exclusive distribution of the published paper (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
