Nature of the intermetallic Al8Si6Mg3Fe in the AK7ch alloy microalloyed by the Ti-B-Sr complex
DOI:
https://doi.org/10.15802/tpm.4.2024.07Keywords:
silumins, iron-containing intermetallics, microalloying, thermal treatmentAbstract
Objective. The aim of the study is to determine the chemical composition, structure, and peculiarities of the formation of the iron-containing intermetallic Al8Si6Mg3Fe in the AK7ch alloy under the combined effect of Ti-B-Sr microalloying and thermal treatment of the melt. Methodology. The object of the study was the AK7ch alloy microalloyed with a Ti-B-Sr complex after temperature-time melt treatment under various regimes. The Al8Si6Mg3Fe intermetallic was studied using metallographic analysis, local X-ray spectral analysis, and differential scanning calorimetry. Results. The chemical composition of the iron-containing intermetallic Al8Si6Mg3Fe was determined, its morphology was studied, and the temperature dependence of its volume fraction in the AK7ch (Ti-B-Sr) alloy as a function of temperature-time melt treatment was established. The reason for the reduction in the volume fraction of Al8Si6Mg3Fe was identified. Scientific novelty. A reduction in the amount of the iron-containing intermetallic phase Al8Si6Mg3Fe in the AK7ch alloy containing the Ti-B-Sr complex was observed after temperature-time melt treatment at 800°C. Practical significance. The reduction of the negative impact of iron due to the formation of a smaller amount of the intermetallic compound Al8Si6Mg3Fe in the structure of the AK7ch alloy containing the Ti-B-Sr complex, after temperature-time melt treatment at 800°C, simultaneously improved the strength, plasticity, and corrosion resistance of the alloy.
References
Pryhunova, A. H. (2020). Rol marhantsiu i ridkofaznoho obroblennia elektrychnym strumom na formuvannia zalizovmisnykh faz u doevtektychnykh splavakh systemy Al-Si-Fe-Mn [The role of manganese and liquid-phase electric current treatment on the formation of iron-containing phases in pre-eutectic alloys of the Al-Si-Fe-Mn system]. Protsesy lyttia, (3(141)), 13-25
Ostrovskaia, A. Ie., & Volchok, I. P. (2010). Vliianie intermetallidnykh faz na soprotivlenie razrusheniiu aliuminievykh splavov. Nauka i pro-gress transporta. Vestnik Dnepropetr. nats. un-ta zh/d transporta, (34), 211–214
Maltsev, M. V. (1964). Modyfytsyrovanye struktury metallov y splavov [Modification of the structure of metals and alloys]. Metallurhyia
Mytiaev, A. A., Volchok, Y. P., Frolov, R. A., Loza, K. N., Hnatenko, O. V., & Lukynov, V. V. (2010). Kompleksnoe modyfytsyrovanye vtorychnykh sylumynov [Complex modification of secondary silumins] Vestn. Dnepropetr. nats. un-ta zheleznodorozh. transporta, (34), 87–96
Mazur, V. Y. (1982). K fenomenologicheskoi teorii modifitsirovaniia siluminov. In Zakonomernosti formiro-vaniia struktury splavov evtekticheskogo tipa: II Vsez. Konf, Dnepropetrovsk, pp. 20-23
Kutsova, V. Z., Aiupova, T. A., & Ambrazhei, M. Iu. (2007). Vliianie mikrolegirovaniia Sr i Sc na fazovyi sostav i svoistva AK7ch. Stroitelstvo, materialovedenie, mashinostroenie, 41, Part 1, 18–30
Hanyev, Y. N., Parkhutyk, P. A., Vakhobov, A. V., & Kupryianova, Y. Yu. (1985). Modyfytsyrovanye sylumynov strontsyem [Modification of silumins with strontium]. Nauka y tekhnyka
Backernd, L., & Vainik, R. (2001). Method for Optimized Aluminum Grain Refinement. Light Metals, 951–954.
Mazur, V. Y., Kapustnykova, S. V., Shportko, A. Yu., & Bondarev, S. V. (2012). Upravlenye kachestvom sylumynovoho lytia s pomoshchiu termovremennoi obrabotky rasplava [Quality control of silumin casting using thermal treatment of the melt]. Novi materialy i tekhnolohii v metalurhii ta mashynobuduvanni, (2), 47-49
Prigunova, A. G., Koshelev, M. V., Borisov, A. G. (2022). Effect of unipolar pulsed electric current treatment of the melt of Al – 8 Wt-% Si – 0.7 Wt-% Fe alloy on iron-containing phases formation and mechanical properties of castings. Mater Sci Tech, 38, 246–253
Naryvskyi, A. V., Naidek, V. L.,& Pyontkovskaia, N. S. (2011). Vlyianye vakuumno-plazmennoho rafynyrovanyia rasplava na kachestvo deformyruemykh aliumynyevykh splavov [The influence of vacuum-plasma melt refining on the quality of deformable aluminum alloys]. Protsessy lytia, (3(87)), 3-9
Borysov, H. P., Kostiuk, A. Y., Semenchenko, A. Y. et al. (2000). Yssledovanye effektyvnosty hydrotsyrkuliatsyonnoi obrabotky Al-Si rasplavov [Study of the effectiveness of hydrocirculation processing of Al-Si melts]. In Proyzvodstvo staly v XXI veke, prohnoz, protsessy, tekhnolohyia, ekolohyia, 12-18.
Kotliarskyi, F. M., Borysov, H. P., Belyk, V. Y. et al. (2008). Vodorodnoe rafynyrovanye aliumynyevykh splavov ot tverdykh nemetallycheskykh vkliuchenii [Hydrogen refining of aluminum alloys from solid non-metallic inclusions]. Protsessy lytia, (4), 48-55
Kutsova, V. Z., & Elahyn, A. S. (2009). Vplyv modyfikuvannia splavu AK7ch na parametry struktury ta mekhanichni vlastyvosti [Effect of AK7h alloy modification on structural parameters and mechanical properties]. In IX Mizhnarodna naukovo-pratychna konferentsiia, Dnipropetrovsk, pp. 537
Baranova, L. V., & Demyna, E. L. (1986). Metallohrafycheskoe travlenye metallov y splavov. Spravochnyk [Metallographic etching of metals and alloys. Reference book]. Metallurhyia
Baum, B. A. (1979). Metallycheskye zhydkosty [Metallic liquids]. Nauka
Mondolfo, L. F. (1976). Aluminum Alloys: Structure and Properties. Butterworths and Co., Ltd., 806. http://dx.doi.org/10.1016/B978-0-408-70932-3.50404-6
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Aiupova T.A., Nosko O.A., Yelagin A.S., Koval D.O.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media. Articles will be distributed under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence.
Authors can enter the separate, additional contractual arrangements for non-exclusive distribution of the published paper (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
